欢迎来到济南家庭装修聚铭宅装饰有限公司!
  • 座机:
  • 电话:13953144313
  • 网址:http://www.jnjmzdc.com
  • 邮箱:616391450@qq.com
  • 地址:山东省济南市槐荫区刘长路国茂装材市场

行业法规

当前位置:首页 >> 新闻资讯>>行业法规>>

济南家庭装修为您介绍复合地板的铺设方法!

来源:http://www.jnjmzdc.com/作者:聚铭宅小编  添加时间:2019-08-05 16:48:23 浏览量:
[导读]:  在家庭装修中,地面处理是非常重要的,不管你是贴瓷砖或躺地板上,不能忽视每一个细节,家里的地面是占地面积大的部分,也是穿轻松的一部
  在家庭装修中,地面处理是非常重要的,不管你是贴瓷砖或躺地板上,不能忽视每一个细节,家里的地面是占地面积大的部分,也是穿轻松的一部分在日常生活在同一时间。很多人在装修过程中都会选择复合地板,那么,复合地板是如何铺设的呢?本期文章,装修设计公司小编为大家介绍复合地板铺设方法。我希望这能有所帮助。
  In family decoration, ground treatment is very important. Whether you are sticking tiles or lying on the floor, you can not ignore every detail. The floor of the home is the largest part of the area, and it is also a part of wearing relaxed at the same time in daily life. Many people will choose composite floor in the process of decoration, then, how to lay composite floor? In this article, decoration design company Xiaobian introduces the laying method of composite floor for you. I hope this will help.
  1、复合地板铺设方法工地清洁
  1. Composite floor laying method site cleaning
  地板铺设前,必须清理地面上的每一个角落,否则很可能影响地板铺设的质量。
  Before the floor is laid, every corner of the ground must be cleaned up, otherwise the quality of the floor is likely to be affected.
  复合地板铺设方法二、地面平整
  Composite Floor Laying Method II. Ground Leveling
  铺设地面前,必须进行地面找平,水平误差不能超过2mm,尤其是边角处,应抬高或修整不平整。
  Before laying the ground, the ground must be leveled. Horizontal errors should not exceed 2 mm, especially at corners, which should be raised or irregularly trimmed.
  复合地板铺设方法3、防潮层铺设。
  Composite floor laying method 3, moisture-proof layer laying.
  前两步处理后,是铺防潮层,要光滑,二要接缝。
  After the first two steps of treatment, it is to lay a moisture-proof layer, to be smooth, and the second is to have seams.
济南家庭装修
  复合地板铺设方法
  Composite Floor Laying Method
  因为地板的铺设是错落安装的,所以要事先铺好,切好地板尺寸。
  Because the floor is laid in staggered installations, it is necessary to lay the floor well in advance and cut the size of the floor well.
  五、切地板。
  5. Cut the floor.
  为避免浪费,切割地板时,挑选有缺陷的锯,再是锯地板时,要在有瓷砖的地面处做。
  In order to avoid waste, when cutting the floor, choose the defective saw, and then when sawing the floor, do it on the tile floor.
  方法六、伸缩缝预留。
  Method 6. Reserve expansion joint.
  因为地板有一定的膨胀率,所以,在与墙面结合处,要预留一定的缝隙。
  Because the floor has a certain expansion rate, so, in conjunction with the wall, to reserve a certain gap.
  复合地板铺设方法七、地板铺设。
  Composite floor laying method 7. Floor laying.
  地板之间,长短错落的铺设,交叉咬合,不易松动,用工具敲打后即可。
  Between the floor, the length of the laying, cross-biting, not easy to loosen, knock with tools can be.
  8. 安装地板板条。
  8. Install floor slats.
  地板的连接处,一般会覆盖以地板分层,将提高美观程度。
  The joints of floors are usually covered with floor layers, which will improve the aesthetic level.
  九、安装脚线。
  9. Installation of foot wires.
  再次检查,以上工序均无问题后,安装踢线,整个铺设过程完成。
  After checking again, after all the above procedures have no problems, the whole laying process is completed by installing the kick line.

上一篇:如何在装修前确定好装修风格?
下一篇:怎么分析处理发霉的天花板?

  • 公司名称:济南聚铭宅装饰有限公司   
  • 电话:13953144313  QQ:616391450   邮箱:616391450@qq.com
  • 地址:山东省济南市槐荫区刘长路国茂装材市场
  • [声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请及时与我们联系,未经沟通本站不承担相关法律责任!