欢迎来到济南家庭装修聚铭宅装饰有限公司!

  • 座机:
  • 电话:13953144313
  • 网址:http://www.jnjmzdc.com
  • 邮箱:616391450@qq.com
  • 地址:山东省济南市槐荫区刘长路国茂装材市场

行业法规

当前位置:首页 >> 新闻资讯>>行业法规>>

如何让地板装修不起鼓的装修工艺!

来源:http://www.jnjmzdc.com/添加时间:2019-09-02 09:38:12
  近年来,人们的生活水平逐渐提高,买房、装修房子已经成为生活中的一个重要问题,人们对良好居住环境的追求没有停止。在装修过程中,无论你是急于装修好的房间装修房子的所有者或承办人员,施工技术的这些东西,你需要理解,地砖,墙的施工技术,使门,包门套施工工艺、施工工艺、墙漆的施工工艺,石膏板吊柜施工工艺等各方面需要注意大家对墙面地砖施工工艺的认识,需要朋友们的参与!
  In recent years, people's living standards have gradually improved. Buying houses and decorating houses have become an important issue in life. People's pursuit of a good living environment has not stopped. In the process of decoration, whether you are the owner or contractor eager to decorate the house or the construction technology, you need to understand the construction technology of floor tiles and walls, the construction technology of doors, wrapped doors, construction technology, wall paint construction technology, gypsum board suspension cabinet construction technology and other aspects need to pay attention to the wall surface. The understanding of floor tile construction technology needs the participation of friends!
  首先作为装饰的重要角色,墙地砖的施工工艺多讲究。首先瓷砖一定要泡水,泡水宜将瓷砖放平,砖体一定要完全浸泡2小时以上,以不起泡为准。好保证是在“阴凉处”,不要晒干,因为墙体干燥,这样会带走瓷砖的水分。
  Firstly, as an important role of decoration, the construction technology of wall and floor tiles is more exquisite. First of all, the tile must be soaked in water, soaking in water should be flat tiles, bricks must be completely soaked for more than 2 hours, whichever is not soaked. The best guarantee is in the "shade", do not dry, because the wall is dry, this will take away the moisture of the tile.
  二是用塑料密封出口,防止落入沙尘,堵塞下水道。第三,如果水泥砂浆作为粘结剂,水泥砂浆的比例为:墙砖1:2,地砖1:3。铺贴施工工艺应根据瓷砖背面箭头指示铺贴方向。留缝宜用标准的十字砖卡准确,铺贴一定面积后,应及时留在砖面杂物、剩余浆、砂等。擦干净。铺装后应及时清理接缝,接缝处要小心。铺路后,节水两天多。
济南家庭装修
  The other is to seal the outlet with plastic to prevent falling into the sand and dust and blocking the sewer. Thirdly, if cement mortar is used as binder, the proportion of cement mortar is 1:2 for wall brick and 1:3 for floor brick. Laying construction technology should indicate the direction of laying according to the arrow on the back of ceramic tile. Standard cross brick cards should be used to retain seams accurately. After laying a certain area, they should be left in time for brickwork debris, residual mortar, sand and so on. Wipe up. After paving, the joints should be cleaned in time, and the joints should be carefully. After paving, it saves water for more than two days.
  验收时,要保证表面平整、干净、无色差、无毛边、瓷现象、无划痕、无裂纹,满足砖墙平整度2m由尺误差≤2mm;瓷砖墙垂直度2m按尺差≤2mm验收标准。卫生间地漏处瓷砖应采用“应”字型施工工艺铺贴,不得倒水,无积水,用地漏、水管接头处应封闭牢固,无渗漏。
  In acceptance, it is necessary to ensure that the surface is smooth, clean, colorless, without hairy edges, ceramic phenomena, scratches and cracks, so as to meet the acceptance criteria of 2m flatness of brick walls from ruler error to 2mm, and 2m verticality of ceramic tile walls from ruler error to 2mm. Tiles in toilet floor leakage should be laid with "Ying" construction technology. No water should be poured out and no water accumulated. Land leakage and water pipe joint should be sealed firmly and without leakage.
  以上就是小编今天为您介绍的施工技术知识,希望对您有所帮助!
  Above is the construction technology knowledge that Xiaobian introduced to you today. I hope it will be helpful to you.

上一篇:毛坯房简装的步骤和费用!
下一篇:房屋装修面积怎么计算?

  • 公司名称:济南聚铭宅装饰有限公司   
  • 电话:13953144313  QQ:616391450   邮箱:616391450@qq.com
  • 地址:山东省济南市槐荫区刘长路国茂装材市场
  • [声明] 本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请及时与我们联系,未经沟通本站不承担相关法律责任!